0

Side by Side guide to telling the difference between fake pioneer HDJ 2000 and Real ones

Posted by JFunk on 19/04/2011 in Dismanteling and re building headphones |

Howdy… Here is a quick guide to help you tell the genuine article from the dodgy copys – I purchased a pair of HDJ-2000 from a Pioneer Authorised dealer and one pair from Alibaba.com where I managed to get a fake pair a bit cheaper than ebay. Unfortunately i ended up getting stiffed on the […]

Tags:

0

HD25-1 Driver repair experiment

Posted by JFunk on 08/02/2011 in Dismanteling and re building headphones |

I have come across a few pairs of HD25 with driver faults. Sometimes it’s just a lose connection and unplugging the cable and plugging it back in seems to fix it but sometimes the fault is more serious. (DO NOT TRY TO REPAIR OR MODIFY HEADPHONES UNLESS YOU ARE SKILLED IN THAT SORT OF THING) […]

0

Cable wrapping how too

Posted by JFunk on 04/06/2010 in Dismanteling and re building headphones, Technologys |

Here is a quick guide to cable wrapping, It is the one thing I get asked about all the time and it is really easy to do, especially oh the HD25 straight cables If you need to know how to remove the cable click here 1) You are going to need to cover up the […]

0

Video Tutorial …. Dismantling the Sony MDR-V700DJ HEadphones

Posted by JFunk on 10/03/2010 in Dismanteling and re building headphones |

Here is a quick guide to dismantling the Sony MDR-V700DJ headphones safely. Sorry for the 3 minutes of nothing at the end… I managed to dismantle them in 7 minutes and had a nice 10 min mix made up… It seemed like a shame to waste it and you may enjoy the tracks. Enjoy Dismantling […]

0

Dismantling Technics RP-DH1200

Posted by JFunk on 02/12/2009 in Dismanteling and re building headphones |

This is a guide to dismantling the mighty Technics 1200 DJ headphones. These headphones take quite a long time to dismantle but there are no nasty surprises other than a few spots of glue. They are very well made and robust like most technics products and that really sows as you pull them apart. Here […]

0

Dismanteling the Senneiser HD25-1 / HD25-13 / HD25C Headphones

Posted by JFunk on 22/11/2009 in Dismanteling and re building headphones |

I Know the HD 25s are designed so that every part is user serviceable but I also know a lot of people are still scared of pulling them apart. So here is a guide with lots of picks. These are definitely the easiest DJ headphones to dismantle and I take my hat off to sennheiser […]

Tags:

0

Dismantling Pioneer HDJ-1000 Headphones

Posted by JFunk on 31/10/2009 in Dismanteling and re building headphones |

Here is a guide to dismantling the mighty Pioneer HDJ-1000 DJ headphones. They are tough to pull apart and I don’t advise it if you can avoid it. Well Here We GO… Stage one. The easy one. Box fresh HDJ-1000s Stage two. Again not to hard – remove the foam earpads by unhooking one small […]

Copyright © 2009-2024 CustomCans.co.uk Custom Headphone Blog All rights reserved.
This site is using the Desk Mess Mirrored theme, v2.5, from BuyNowShop.com.