My Cart 0 items: £0.00

Upgrade cable for Beyerdynamic T5P

More Views

  • Cable for Beyerdynamic T1 / T5P Gen 2
  • Cable for Amiron Home
  • Custom litz cable for beyerdynamic T1
  • Upgrade cable for Beyerdynamic T5P

Ultra-low capacitance cable with extended slim 3.5mm jacks (Beyerdynamic T1 / T5P Gen 2, Amiron Home, Audeze Sine)

Be the first to review this product

Availability: In stock


Quick Overview

This is an audiophile grade, ultra-low capacitance cable for connection between the Beyerdynamic T1 and T5P Gen 2 along with amiron home and audeze sine and a standard TRS 3.5mm or 6.35mm jack.

The cable is made using 84 strand litz copper, wrapped in coloured paracord of your choice, and hand braided here in the UK.

* Required Fields



This is an audiophile grade, ultra-low capacitance cable for the Beyerdynamic T1 and T5P Gen 2 along with amiron home and audeze sine to give a standard output to 3.5mm or 6.35mm TRS jack.

Capacitance: Capacitance adds a small delay to the sound, which varies with frequency and can cause roll off, so keeping it as low as possible helps make sure the signal stays clean. With our ultra-low capacitance cables the audible improvement over a stock cable can be heard and easily measured. Our ultra-low capacitance cables typically measure between 7.5-40pF up to 2m with smaller connectors or up 90pF for longer 3-4m cables with larger connectors. This is still a significant difference against most stock cables, for example the Sennheiser HD650/HD600 stock cable averages over 600pF.

Customisation: Our ULC cables are all handmade to order here in the UK. We can make them in custom colour combinations of your choice, using four strands of paracord, where we recommend using just one or two colours to give either a solid colour or a two-tone stripe look. Our standard cable length is 1.5m, with any length up to that being the same price. We charge extra for every half meter up to a maximum length of 4m. We currently offer a choice of three jacks for standard litz cables: a wide-body 3.5mm straight jack, a 6.3mm straight jack or 6.3mm angled jack. For other connector types, including XLR’s or 2.5mm TRRS jacks, please see the balanced cable listing here. Any questions regarding our customisation options just drop us an email.

Ergonomics: The cable is very flexible, fairly lightweight and soft thanks to the paracord covering. In addition it is not prone to kinking.

Resistance: Each of the four wire cores is made up of 84 strands of individually insulated copper wire, which gives a lower resistance than most OFC cables (so less insertion loss). The cable is hand braided, twisted from the Y split to cut RFI and EFI down. It also reduces the inductance and crosstalk you may get from a straight parallel wire setup. Silver solder is used to keep the signal path as clean as possible.

Skin Effect: Any skin effect will have a negligible influence on audio frequencies as this cable is made from woven litz, with each strand only 0.07mm across. Essentially there is no skin effect until you get over 700Khz, well above audible frequencies.

Warranty & Servicing: All our cables have a 2 year warranty. If you experience any problems beyond 2 years we offer sensibly priced repairs. This is true of alterations too, so if in the future you need the cable to be shortened or re-terminating for a new amp we can do that for a sensible price as well. We show our appreciation for repeat business by offering 10% off any additional ULC cables after one has been purchased. Tampering with or attempting to repair your cable may void your warranty.

International Orders: Over 60% of our customers are outside the UK, so we have a lot of experience with shipping worldwide, offering the same great service to suit your needs such as tracking.

Expect orders of handmade cables to be dispatched within 5-12 working days.

Additional Information

Manufacturer CustomCans

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.